论文编号:YS045  论文字数:10390.页数:27

摘 要：在实际生产中，通过对输出菲林质量的调查、分析与研究，发现企业由于输出中心菲林质量问题而耽误生产时间，造成不少的经济损失。菲林在输出过程中，易存在着诸如：输出文件中缺少字体、图像分辨率错误、印刷色序出错、页面设置等问题。本文主要通过在菲林输出过程中，对输出时照排室环境、照排机工作参数、RIP软件参数设置等情况的控制来达到对菲林输出质量的控制进行研究。从RIP的输出以及激光照排等方面来进行试验和分析；通过调整RIP参数，改变激光照排工艺等，来测试各个环境下输出的菲林的质量，从而找到最理想的方法、工艺。研究印刷菲林输出质量对企业效益，有直接的关系，对于企业印刷质量的提高，生产成本的减少，是企业提高竞争力的关键因素之一。
关键词：印刷菲林；RIP软件；激光照排

Abstract：In actual production, film output through the quality of investigation, analysis and research, found that the output center enterprise quality problems delay film production time, resulting in some economic losses. Film in the output process, the easier problems, such as: output file is missing fonts, image resolution, error, printing color sequence error, the page settings and so on. In this paper, the output process through the film, on the output typesetting room environment, the working parameters imagesetter, RIP software, the control parameter settings, etc. to achieve the quality control of the output of the film to study. The output from the RIP and laser typesetting and so on to carry out testing and analysis; by adjusting the RIP parameters, such as changing the laser photo-typesetting technology, to test the output of the film under various environmental quality, in order to find the best method, process. Yanjiu printing film output quality on enterprise efficiency, directly Di between the Tigao for enterprise print quality, production cost reduction of the enterprise's key factors to improve competitiveness Li one.
Keywords: Print film; RIP software; laser typesetting
目  录
中文摘要 I
英文摘要 II
目  录 III
1  绪论 1
1.1  课题研究的背景及意义 1
1.2  课题研究的主要内容 1
2  RIP-光栅图像处理器 3
2.1  RIP的主要作用 3
2.2  RIP的性能 5
2.3  RIP软件的发展趋势 5
2.4 PostScript语言 6
2.5 RIP输出 6
3  激光照排技术 14
3.1  激光照排技术的定义 14
3.2照排机使用 14
3.3 曝光及操作 16
4  菲林输出 17
4.1  软片 17
4.2 各种软件对菲林的影响 18
4.3  菲林输出 19
4.4  网点线性化调整 19
5  结论与展望 21
5.1  结论 21
5.2  展望 21
致  谢 22
参考文献 23

本站会员可自行下载: 印刷菲林输出质量的研究 (收费:11800 积分)  如何获取积分?